web analytics

Application Cup – Pneumatic Connection

Arizona Powder – Application Cup & Pneumatic Connection

The application cup  & pneumatic connection from Arizona Powder is a great way to easily connect your GEMA OptiSelect GM02, OptiFlex2 GM03 or KCI-K1 manual gun with a lab sized application cup and to your existing dosing and conveying air lines. The application cup also fits your Parker Ionics GX131/132 manual gun. The pneumatic connection is not needed for the GX131/132 guns.

Application Cup

Aftermarket Application Cup – $85.00/ea
P/N 1002069-CL  Application Cup

Application Cup Pneumatic Hose Connection – $90.00/ea
P/N 1002587-01  Pneumatic Hose Connection for GEMA or KCI K1
(3′ x 8mm OD dosing & conveying hoses w/fittings seen attached above)

This Pneumatic Hose Connection allows you to easily disconnect your dosing and conveying air lines from your current injector and re-connect them to this application cups internal venturi injector.

Connect the red quick release connection (with integrated powder stop) with the Quick release coupling of the conveying air hose. The conveying air hose must already be connected to the output on the rear side of the control unit.

Connect the black quick release connection (with integrated powder stop) with the Quick release coupling of the supplementary air hose. The supplementary air hose must already be connected to the output 1.3 on the rear side of the control unit.

No Additional Fluidized airline is required, ambient air is used to fluidize the powder through the fluid membrane on the bottom of the application cup.

Quality replacement Powder Coating parts for less

Do NOT follow this link or you will be banned from the site!